Design Considerations for a Portable Raman Probe Spectrometer for Field Forensics
Abstract
Raman spectroscopy has been shown to be a viable method for explosives detection. Currently most forensic Raman systems are either large, powerful instruments for laboratory experiments or handheld instruments forin situpoint detection. We have chosen to examine the performance of certain benchtop Raman probe systems with the goal of developing an inexpensive, portable system that could be used to operate in a field forensics laboratory to examine explosives-related residues or samples. To this end, a rugged, low distortion line imaging dispersive Raman spectrograph was configured to work at 830 nm laser excitation and was used to determine whether the composition of thin films of plastic explosives or small (e.g., ≤10 μm) particles of RDX or other explosives or oxidizers can be detected, identified, and quantified in the field. With 300 mW excitation energy, concentrations of RDX and PETN can be detected and reconstructed in the case of thin Semtex smears, but further work is needed to push detection limits of areal dosages to the ~1 μg/cm2level. We describe the performance of several probe/spectrograph combinations and show preliminary data for particle detection, calibration and detection linearity for mixed compounds, and so forth.
Read the paper
Related studies
- The physics, dosimetry and microdosimetry of boron neutron capture theraphy
- Patient radiation dosimetry in MSCT examinations
- Multiyear Program Plan for the High Temperature Materials Laboratory
- Nuclear structure studies with neutron-induced reactions : fission fragments in the N=50-60 region, a fission tagger for FIPPS, and production of the isomer Pt-195m
- Institutional research and development, FY 1988
- Laboratory Directed Research and Development Program: FY 2025 Completed Projects
Go deeper in Evidence Hub
Evidence Hub adds a study data sheet (design, sample size, evidence level, key numbers), an AI summary and a chat grounded in the paper's text.