Evidence Hub

Dosimetric properties of colloidal quantum dot-based systems for scintillation dosimetry

Marie-Ève Delage, M. Lecavalier, D. Larivière, C. Allen, L. Beaulieu

Physics in Medicine and Biology, 2019

10 citations

Abstract

Colloidal quantum dots (cQDs) are starting to be used in radiation detection, either combined with an organic fluorophore or used as a sole luminescent material. In the latter case, only few studies report on cQD-based detectors for medical applications, especially for scintillation dosimetry in radiation therapy. Moreover, most of these studies focus on the effects of radiation on cQD photoluminescence but do not look into the properties of the scintillation signal itself. The present article provides a study of those cQD scintillation properties not previously investigated including the linearity of the signal as a function of dose, the signal dose rate and beam energy dependencies. The latter was also characterized for the commercially available scintillating fiber BCF-60 and liquid scintillator Ultima Gold. CdSe multishell cQDs in two physical forms were used as a sensitive dosimeter volume: a cQD powder to constitute a fiber optic based dosimeter and cQD liquid dispersions to be volumetric dosimeters. The signal linearity was assessed with a R2 coefficient >0.999 over a clinically relevant dose range at kV and MV beam energies. The cQDs had a good overall dose rate independence, with a change from the relative dose of 1% at MV energies and 2% at kV energies, of their scintillation output when irradiated with an orthovoltage device and a linear accelerator. Regarding the beam energy dependence, the cQD powder had the highest dependence amongst all the scintillators…

Read the paper

Related studies

Go deeper in Evidence Hub

Evidence Hub adds a study data sheet (design, sample size, evidence level, key numbers), an AI summary and a chat grounded in the paper's text.

Open this study Sign up free