Evidence Hub

PHITS Monte Carlo zoning and workplace studies of medical radiographic rooms

Ngankem AE, Djoumessi Zamo FC, Guembou Shouop CJ, Bongue D, Talla Fogang R, Ngwa Ebongue A, Ngano Samba O, Moyo Ndontchueng M

Physical and engineering sciences in medicine, 2026

Abstract

The commissioning of a new radiological facility or practice requires a comprehensive process for shielding design and verification process. Traditionally, shielding design has relied on deterministic methods, such as those described in NCRP Report No. 147, and Monte Carlo codes, whereas verification has been performed using dosimeters and survey meters. Although deterministic methods remain the conventional approach, Monte Carlo simulations enable more detailed assessments of complex geometries and three-dimensional (3D) dose distributions. In this study, a Monte Carlo model based on the Particle and Heavy Ion Transport code System (PHITS) version 3.33 was developed to support shielding design, workplace zoning, and verification procedures in a conventional radiography room equipped with a remote-controlled examination table. Shielding parameters were determined using both deterministic and Monte Carlo methods, while experimental dosimetric measurements were performed to validate the model. The deterministic method was used to estimate barrier thicknesses, while on-site measurements yielded dose rates and actual lead sheet thicknesses. The Monte Carlo method was used to simulate ambient equivalent dose rates and weekly air kerma. The simulation results demonstrated a mean deviation of ~ 8.11% from the measured dose rates after excluding outliers associated with the CT room. This deviation falls within the range reported in the radiation protection modelling literature. The…

Read the paper

Related studies

Go deeper in Evidence Hub

Evidence Hub adds a study data sheet (design, sample size, evidence level, key numbers), an AI summary and a chat grounded in the paper's text.

Open this study Sign up free